SEMINARY: SHOT PEENING ON GEARS

www.assiot.it

OUR NEW LOOK! NEW SPACES FOR NEW IDEAS...

2 EFFE ENGINEERING WINS THE EIGHT EDITION OF "OK ITALIA 2011", A PRIZE SPONSORED BY UNICREDIT BANK. 2EFFE THANKS ALL THE STAFF.

SEMINARY TNX-TECMET 2000-NIKON INSTRUMENTS c/o 2EFFE ENGINEERING

Programma:
X-RAY diffraction
residual stress
scanning electron microscopy

On 15th March 2010, 2 Effe Engineering and Brescia University made an Agreement in order to develop an Applied Research entitled Cold spray surface treatment and potential fields of application in the energy sector. The project will last two years.

2EFFE ENGINEERING is one of the sponsors of the 8th European Conference on Residual Stress (ECRS8)"

8th European Conference on Residual Stress (ECRS8)
On June 26-28, 2010 at Riva del Garda (TN), Italy


The 8th European Conference on Residual Stresses (ECRS8) follows the tradition of previous ECRS events held in Karlsruhe (1983), Darmstadt (1990), Frankfurt/Main (1992), Cluny (1996), Delft (1999), Coimbra (2002) and Berlin (2006). ECRS8 is the forum where the main advancements and new results in residual stress determination and modelling are presented and discussed among the main experts in this field. Main topics covered by the program are: experimental methods, including neutron and synchrotron radiation residual stress analysis, strain mapping, in situ analysis, microstrain studies, texture-stress relationships, residual stress modelling and computation, generation of residual stresses by manufacturing and processing of materials, residual stresses in thin films, coatings and in multiphase materials, residual stresses and phase transformations, grain interaction mechanisms and elasto-plastic behaviour of materials, multiscale modelling and scale bridging aspects.

Links: ECRS8 official web site , Scuola Paolo Giordano Orsini.

2 Effe Engineering S.r.l. will be present at the conference Efficient Energetic Performance: contribution of new materials" that will take place at the "Modena Fiere" in Modena on 16 th and 17 th october with a paper entitled "Mass reduction using HVOF coatings on aluminium and magnesium alloys" - G. P. Marconi - 2 Effe Engineering; L. Lucaora – 2 Elle Engineering.

2 Effe Engineering S.r.l. will be present at the 32th AIM National Conference that will take place in Ferrara with two papers entitled: 
"Optimization of powder chemical composition of hard metals for  anti usury coatings, achieved with HVOF technology"- G. P. Marconi - 2 Effe Engineering – G. M. La Vecchia – Brescia University; M. Gelfi – Brescia University; N. Lecis - Politecnico di Milano.
“Importance of residual stress measurement of coatings achieved with heat-treatment spraying"- G. P. Marconi - 2 Effe Engineering;  G. M. La Vecchia – Brescia University; M. Gelfi – Brescia University; M. Rogante – Studio d’ Ingegneria Rogante.

2 Effe Engineering S.r.l. will be present at the Conference "Trends in surface technology '08" that will take place at the Politecnico of  Milano in the room S.01 on 26 th June,  with a paper entitled “HVOF coatings on aluminium alloy"  - G. P. Marconi - 2 Effe Engineering;  G. M. La Vecchia, N. Franchi – Brescia University.

2 Effe Engineering S.r.l. will be present at the 5th National Conference on hydroelectric power plants that will take place at the Exhibition Centre "Palazzo delle Feste" in Bardonecchia (TO) on 19 th and 20 th June,  with a paper entitled “Using mobile Rx microdiffractometer for no destructive relief in critical areas of Pelton Gear"  - G. P. Marconi – 2 Effe Engineering; L. Lutterotti – Trento University.

2 Effe Engineering S.r.l. will be present at the conference “Convegno finitura e oltre” that will take place at the Garda Exhibition Centre in Montichiari, Thursday 10 April 2008 from 2.00 pm to 4.00 pm in the room named “Aida” with a paper entitled “The functional aluminium finishing using nanotechnologies: project, research and development - Eng. G. Paolo Marconi.www.metef.com/ITA/convegni_eventi/convegno_Finitura_Oltre/convegno_FO.asp

2 EFFE ENGINEERING will be present at Padova University at the Study Day organized by Italian Association of Metallurgy with a paper entitled “Fix and portable equipment for measurement of residual stress by X-Ray diffraction” (G.P. Marconi-2Effe Engineering).

2 EFFE ENGINEERING will be present at Alumotive (Modena) with a paper entitled “HVOF coating on aluminium alloys: fatigue behaviours” (G.P. Marconi-2Effe Engineering; G.M. La Vecchia, N. Franchi-Brescia University)
For information: www.alumotive.it

2 EFFE ENGINEERING will be present at Milan at the IIS Study Day entitled “Residual stress on weldings”, with a paper entitled “Advanced methodology for measurement of residual stress on weldings: X-Ray diffraction. One example of use on F1 suspensions arms” (G.P. Marconi, G. Gennari-2Effe Engineering; L. Furbatto -McLaren Racing).

2Effe Engineering is glad to inform that from 12 september 2006 will be operative the new head office in Soiano del Lago (Brescia, Italy) Brescia street 45. The new plant has an area of 9000 square meters whose 2600 builded.

Now our management quality system is in compliance also with ISO/TS 16949:2002

· “Shot Peening on Pelton’s Wheels: Methods of Control and Results”
G.P. Marconi - 2 Effe Engineering S.r.l. - Manerba del Garda (Bs);
M. Lauro, W. Bozzolo - Enel Produzione S.p.A. PGI/ASP Unità di Torino.
· “Correlation Between Mechanical and Geometrical Characteristics of Shot and Residual Stress Induced by Shot Peening”
G.P. Marconi -2 Effe Engineering S.r.l. - Manerba del Garda (Bs);
G.Citran - Pometon S.p.A.- Maerne (Ve)